• -10%
CEBOS UNIVERSAL acrylic Finish,...
CEBOS UNIVERSAL acrylic Finish,...

CEBOS UNIVERSAL acrylic Finish, washable, matt finish,ideal for creating delicate guazzature referring to a past time.

8000801401848
€10.35 €11.50 -10%
Tax included

CEBOSI UNIVERSAL

FORMATO

The products of CeboSi Universal

CeboSi Universal

Acrylic water interior and exterior, washable, matte appearance and semicoprente, ideal for creating delicate guazzature referring to a past time.

CeboSi Fund

Finish water-borne acrylic paint for interior and exterior, which looks slightly embossed.

Staining of CeboSi Fund and CeboSi Universal:

dye the products in the desired color, with the dyes CeboKit, in the same color, and dosage.

Mode of application CeboSi Bottom:

after careful cleaning and grouting of supports, apply CeboSi the Bottom such as in a hand or two up to full coverage, with roller, short hair: in the case of walls are particularly absorbent or powdering surfaces, apply a coat prior to CeboSi Fund diluted 30% with water.

Theoretical coverage: 10 square metres per litre.
 
Mode of application CeboSi Universal:

the product is ready to use and should be applied to the hand with the brush, available in sizes 2.5 and 4 inches. Dip the tool into the product and pass it to the strokes crossed with the effect of a spatula on the prepared surface with CeboSi the Bottom, avoiding riquadreture net (photo 1): to continue the application until you reach the part machined with the tool exhaust, so as to avoid obvious overlaps of color (photo 2).



CeboSi Universal can also be applied with a glove; dipping the tool into the product and pass it on in circular motions and uniform with a light hand, and as flat as possible (photo 3).



Theoretical coverage: 8-10 square meters per litre.
 

The products of CeboSi Universal additive

CeboSi Universal

Acrylic water interior and exterior, washable, matte appearance and semicoprente, ideal for creating delicate guazzature referring to a past time.

CeboSi Fund

Finish water-borne acrylic paint for interior and exterior, which looks slightly embossed.

CeboAd Additive

Special additive, white and colored, added to CeboSi Universal, gives the product characteristics that create effects, antiquing, delicate to the touch and the colours are deep.

Staining of CeboSi Fund and CeboSi Universal:

dye the products in the desired color, with the dyes CeboKit, in the same color, and dosage.

Mode of application CeboSi Bottom:

after careful cleaning and grouting of supports, apply CeboSi the Bottom such as in a hand or two up to full coverage, with roller, short hair: in the case of walls are particularly absorbent or powdering surfaces, apply unamano prior CeboSi Fund diluted 30% with water.

Theoretical coverage:

10 square metres per litre.

Mode of application CeboAd Universal with CeboAd additives:

after thorough mixing, pour CeboAd Additive, White, or CeboAd Additive White and Colored, in CeboSi Universal pre-coloured and mix until you obtain a homogeneous paste. Note: use the product with additives in the span of 48 hours. Apply to the hand with the brush, giving it to the strokes crossed with the effect of a spatula on the prepared surface with CeboSi the Bottom (Photo 1). To brush, wipe the treated surface to distribute evenly throughout the particle. After about 6 sqm. and anyway, not before the drying of the product, wipe the surface with a special trowel or plastic blade, a small cross, by exerting a light pressure, until you highlight and smooth the particle (Photo 2).



Theoretical coverage: 8 sqm per litre.
50 Items
8000801401848
No reviews
Product added to wishlist

iqitcookielaw - module, put here your own cookie law text