The additive to antibacterial and fungicide, to prevent, and to prevent the formation of mold, ml.250

The additive to antibacterial action and fungicidal broad-spectrum action, indicated to prevent and to prevent the
the formation of molds that grow in homes or in certain environments (dairies, hospitals etc.) where is
a higher chance of attack of mycotic.
Medical Surgical
 

MODE’ Of USE:
Use a pack of Sanamuri K1 anti-MOULD (250 cc) in 14 liters of
water-based paint.
Mix the product well Sanamuri K1 before use; a light
separation of the liquid is normal and does not alter the effectiveness of the product.
Dilute the paint following the instructions on the jar, and mix well.
Pour Sanamuri K1Additivo in the water-based paint, taking care to mix
very well to obtain a perfect homogenization, and, consequently, the maximum effectiveness of the
product.
Sanamuri K1DISINFETTANTE MOULD is compatible with all water-based paints trading-
manufactured by J COLORS and does not change the characteristics of permeability, coverage and resistance to
dry.
It does not cause any color change.

NOTE
In case you want to use the additive disinfectant in fixatives JUFOND ACRYL and JUFOND
The INSULATING FIXATIVE TO WATER, it is suggested to dilute the Sanamuri K1ADDITIVO DISINFECTANT
Anti-MOULD, once agitated, in a certain amount of water (1-2 liters) and then use this mixture for
dilute the insulating the same. Do not introduce the Sanamuri K1 DISINFECTANT anti-MOULD directly
in insulating prior to the dilution. Do not use the Sanamuri K1 DISINFECTANT, anti-MOULD
in the ACRYLIC PRIMER D1 and ACRYLIC PRIMER D2.

WARNINGS
Store in a jar tightly closed and store at temperatures between + 5 °C and not higher than + 35 °C.
To use all the product, wash with water the empty container and use the mixture obtained for
dilute the water-based paint